About Procera Networks Inc.

Procera offers a complete selection of hardware platforms to cover every kind of deployment need. This ranges from the entry-level PL5600 that goes from 4 Mbps to 100 Mbps, through the 2 Gbps PL7720 Also make the PL5600 and PL7720 and PL10000 links to the specific product pages, to the high-end AdvancedTCA chassis PL10000 series that manages up to 80 Gbps throughput (40 Gbps full duplex). The use of a common firmware enables the different platforms to co-exist in the same network. This positively affects both the initial CAPEX investment since you do not have to overspend, as well as the OPEX since the user interface and feature-set is the same across all platforms. This way you can deploy a PL5600 on a backhaul from a wireless access point (AP), and a PL10000 at the aggregation point between core and edge at a large site. Value Proposition Procera Networks will lead the migration from best-effort, packet-based internetworking to the next generation of flow-based intelligence and traffic control for the emerging triple play (Voice, Video and Data) based IP networks. As the number of high-speed Internet subscribers and broadband-aware mobile devices continues to increase exponentially worldwide, and applications such as peer-to-peer (P2P) file sharing, voice chat, streaming media, and specifically video-based content downloads and uploads continues to consume enormous amounts of available bandwidth, the impact, cost and business models for service providers is changing rapidly. These service providers are not keeping up with the bandwidth requirements to support these new customers, devices, applications and growing file sizes. PacketLogic’s flow-based intelligent Traffic Management solution is perfectly positioned to help these broadband operators with cost and quality control issues. This is a necessity as the Internet becomes more and more mission critical and central to our everyday professional and personal lives. PacketLogic - Powerful Traffic and Service Management Solutions   PacketLogic is a modular Traffic Management System that contains Surveillance, Firewall, Traffic Shaping, Statistics and NetAccess. The modules can be combined according to customer requirements and demand. The only mandatory module is Surveillance. The combination of functionality is based on the Netintact process Monitor-Analyze-Optimize. A network administrator has to continuously monitor and analyze the traffic in order to optimize it based on accurate and precise information. Traffic is a more common reason for communication problems than infrastructure. The objective is best possible utilization of available bandwidth. The visible result is a better user experience, a lower investment in additional bandwidth and quality assurance on performance and business critical traffic like business systems, IP telephony and streaming services. The optimization process is a necessity today when traffic patterns and user behavior on the Internet are rapidly changing due to more users going online and more functionality migrating to IP as communication carrier. PacketLogic utilizes the migration from Best Effort to Quality of Service (QoS). PacketLogic has a technical design, features and capacity like no other Traffic Management System. All traffic is identified based on content versus communication port. This is known as real Layer 7 identification. Layer 7 identification is a necessity today when most client software, like P2P filesharing, is customizable to communicate over any given port to avoid traditional port-based firewalls and traffic management systems. PacketLogic is a client-server solution. All modules are managed by an easy-to-use client application that is available for Windows and Linux. For client-server communication PacketLogic employs Netintact´s own high security encryption layer, which uses widely used and proved secure encryption methods. The admin network interface of the PacketLogic can be connected to an administration network (DMZ) or make remote administration possible over the Internet, e.g. from a Network Operating Center (NOC).

PL10000   The PL10000 series is a modular AdvancedTCA (ATCA) chassis solution in three sizes – 3RU (rack units), 5RU and 12RU. All are 19" rack-mounted systems that fit the depth of a telecom rack. It delivers capacity of 40 Gbps Full Duplex, i.e. 80 Gbps throughput, and 5M subscribers per system. This makes it the unchallenged leader in DPI (Deep Packet Inspection). The high capacity makes PL10000 a future-proof investment that will grow with your customer base and changing conditions. The PL10000 series is based on the AdvancedTCA industry standard which guarantees carrier-grade performance and full resilience on all vital components like power supply and cooling. PacketLogic PL10000 is purpose-built with Tier-1 broadband network deployments (both wired and wireless) in mind. Service providers now have a platform that will support millions of subscribers while giving them the business intelligence, service creation, network visibility and control required to successfully roll out new revenue-generating services and optimize network performance. Designed as a carrier-grade platform, the PL10000 gives service providers the scalability, reliability and flexibility they need to meet network requirements for today and tomorrow. It has four times the capacity of its nearest competitor, enabling a single deployment to handle millions of broadband subscribers. This increased capacity, in combination with pertinent asymmetric traffic support and the "5 9s" reliability that carriers demand, enables deployment of PacketLogic anywhere in the network. Functionality has not been compromised in favor of capacity. PL10000 comes with the new version 12 of the PacketLogic firmware, which incorporates the extensive range of features in version 11 along with highly valuable new functionality. DRDL™ (Datastream Recognition Definition Language) is at the core of what makes PacketLogic stand out from the competition. This state-of-the-art traffic identification and classification engine drives all PacketLogic platforms. PL10002 (3RU) PL10002 is the entry-level member of the PL10000 series. Based on the industry standard AdvancedTCA (ATCA), it delivers 8 Gbps capacity in a compact and cost-efficient 3RU (rack units) design with reliable performance that guarantees high availability. Every PL10002 handles up to 500k subscribers per system. This makes PL10002 the preferred choice for link aggregation in the edge/access of broadband networks.   PL10005 (5RU) PL10005 is the 10G solution in the PL10000 series. Based on the industry standard AdvancedTCA (ATCA), it delivers 20 Gbps processing capacity, i.e. 10 Gbps Full Duplex, in a single chassis with reliable performance that guarantees high availability. Every PL10005 handles up to 3M subscribers per system. This makes PL10005 the preferred single-channel 10GE solution for broadband networks.   PL10014 (12RU) PL10014 is the flagship multi-10GE member of the PL10000 series. Based on the industry standard AdvancedTCA (ATCA), it delivers up to 80 Gbps processing capacity, i.e. 40 Gbps Full Duplex, in a single chassis with reliable performance that guarantees high availability. Every PL10014 handles up to 5M subscribers per system. This capacity and performance makes PL10014 the unchallenged capacity leader in carrier-grade DPI (deep packet inspection). PL10000 Series Datasheet PL10000 Series Datasheet (A4) PL10014 (12RU) Datasheet PL10014 (12RU) Datasheet (A4) PL10005 (5RU) Datasheet PL10005 (5RU) Datasheet (A4) PL10002 (3RU) Datasheet PL10002 (3RU) Datasheet (A4)

Procera Networks - Live Demo